Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Commercial Locksmith Across Burbank
A commercial locksmith call in Burbank is rarely a simple “lost key” situation. It’s a studio facility manager needing a master key re-pin before a production wraps, or a shop owner on Magnolia Boulevard whose mortise lock bound up in the August heat. We get that. Blackthorn Locksmith & Security dispatches background-checked, uniformed technicians to every corner of Burbank, from the warehouse rows near the 5 to the storefronts along San Fernando Boulevard. A live person answers our phone 24/7 at (818) 390-9007, and we’ll give you a written price before any work starts. Not an estimate whispered over the phone. A written number you can hold us to.
Our Commercial Locksmith team handles lockouts, master key systems, panic bars, access control, high security cylinders, and commercial door repair. The work spans two very different Burbanks: the badge-gated studio lots where Warner Bros. and Disney security offices control who walks through the door, and the post-WWII ranch neighborhoods where detached workshops and driveway gates need every lock keyed alike in one visit. We serve both, and we carry the hardware to prove it.
Why Blackthorn Locksmith & Security Is Burbank’s Preferred Commercial Locksmith Company
Shane Delaney founded Blackthorn Locksmith & Security in 2008 on a simple idea: write the price down, do the work carefully, and leave the place cleaner than you found it. That’s the Cedarwell Care Promise, and it applies to every commercial job in Burbank. Shoe covers and drop cloths go down before a technician touches a door frame on an Olive Avenue office suite. A photo of the clean-up is taken before we walk out. And every completed job carries the 365-Day Done Right Promise: if it’s not right, we make it right, in writing.
Burbank commercial clients check credentials harder than most. The studios require formal background checks and credentialing before a vendor steps onto a lot. Our technicians carry that discipline into every job. Local shops near Burbank High School call us for re-keys after employee turnover. Property managers in the Chandler Bike Path corridor rely on us for scheduled master key maintenance. The response pattern is consistent: call, get a live person, get a written price, and see a uniformed tech who knows the difference between a Schlage and a Sargent cylinder without squinting at it.
High Security Locks in Burbank
High Security Locks in Burbank are not a luxury upgrade. They’re the default for any commercial property where a standard Kwikset deadbolt would fail within months. A typical high security cylinder installation for a Burbank storefront or office runs $220-$480 per door, depending on whether the cylinder is a Medeco, Mul-T-Lock, or Abloy and whether we’re building a new keyway or extending an existing restricted key system.
Restricted Keyways for Tenant Turnover
Burbank landlords with studio-adjacent rental units and commercial suites near the 134 face the same problem: a former tenant still holds a key. Restricted keyways solve it. We cut and control the blanks, so no one can duplicate a key at a hardware store. We re-pin the cylinder when a tenant leaves, and the old key stops working. A restricted key system with a Medeco or Mul-T-Lock cylinder typically runs $180-$340 per cylinder to convert.
Bump-Resistant and Drill-Resistant Hardware
The 1950s-era ranch homes along Victory Boulevard and Burbank Boulevard that run home-based businesses out of detached workshops often have original mortise locks that a bump key defeats in seconds. We install ANSI Grade 1 cylinders with bump-resistant pin stacks. For a detached workshop or garage door, expect $240-$390 for a high security deadbolt with a hardened steel core and anti-drill plate.
Commercial Door Repair in Burbank
Commercial Door Repair in Burbank often starts with a door that won’t latch, not a lock that won’t turn. The San Fernando Valley’s 100°F summers plus Santa Ana dry-air contraction make wood door frames breathe. A frame that swelled in July leaves a deadbolt that binds hard by August. By December, that same frame has shrunk, and the latch rattles loose. We see it constantly on the post-WWII ranch houses and older commercial buildings between the 134 and 5 freeways. A typical commercial door alignment and re-hang in Burbank runs $210-$390, including adjusting the strike plate and re-setting the hinges.
Frame Realignment Before New Hardware
Installing a new commercial-grade lock on a warped door frame wastes your money. The lock will bind within a season. We check frame square first, then install. On a Burbank storefront with a sagging aluminum door, expect $180-$280 for hinge replacement and weight adjustment before we even touch the cylinder.
Panic Bar and Exit Device Service
Buildings along San Fernando Boulevard and in the Burbank Media District that fall under commercial fire code need working panic bars. We install and service rim-style and vertical rod exit devices from Sargent and Yale. A new panic bar installation in Burbank runs $520-$820 per door, including the exterior trim. Re-tensioning or re-latching an existing bar runs $140-$220.
Trusted Brands We Service in Burbank
We carry Schlage and Kwikset for standard commercial grade work, and Medeco and Yale for restricted keyways and high security applications. For Burbank clients, that means we can usually re-pin or swap a cylinder the same day without waiting on a distributor. Our vans are stocked with common cylinders, tailpieces, strike plates, and mortise cassettes for the hardware Burbank buildings actually have, not just what’s in a catalog. If your office suite on Alameda Avenue has an old Sargent mortise lock, we can rebuild it on-site rather than ordering a replacement that takes a week.
Common Commercial Locksmith Problems We See in Burbank Homes
- Seasonal door binding on ranch-era frames. The 1950s bungalows between the 134 and 5 freeways shift with every heat wave and Santa Ana event. Locks that work fine in spring bind hard by late August unless the strike plate is re-aligned.
- Detached workshops with mismatched locks. Home-based businesses around Burbank’s flatland neighborhoods often have three or four different keys for the house, shop, and gate. We see this weekly, and it usually means a keyed-alike master key system, not just another deadbolt.
- Studio lot access without proper vendor credentials. Commercial property managers near Warner Bros. and Disney assume any locksmith can walk onto a lot. Without the vendor badge earned through each studio’s security office, the crew doesn’t get past the gate.
- Worn mortise lock bodies on older storefronts. The commercial strips along Burbank Boulevard and Victory Boulevard were built out in the 1960s and 70s, and many still have original mortise cassettes that are simply worn past re-pinning. We carry replacements so the repair doesn’t turn into a three-visit project.
Pricing for Commercial Locksmith in Burbank, CA
Here’s what you should budget, with real Burbank numbers. A basic commercial lockout (no drilling) runs $95-$160. Re-keying a storefront after employee turnover runs $25-$40 per cylinder plus a service fee of $65-$90. A high security cylinder installation with restricted key control runs $180-$480 per door. Commercial door re-alignment runs $210-$390. Panic bar installation runs $520-$820 per door. Access control installs are quoted per opening after a site walk, but a single-door keypad or card reader typically starts around $850. The price we quote on the phone is the price on your invoice. No call-out surcharge added when the tech arrives. Call (818) 390-9007 and we’ll give you a written number before anyone is dispatched.
We Also Serve Cities Near Burbank
Our Commercial Locksmith in Burbank clients often ask us to handle their Glendale storefronts, West Hollywood offices, Altadena commercial properties, and Beverly Hills retail spaces. We dispatch the same background-checked technicians and the same written-price policy to all of them. If your business straddles the Burbank-Glendale line, one call covers both.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Commercial Locksmith in Burbank
Yes. We re-pin every existing lock to a single key configuration in one visit, as long as the hardware is compatible or replaceable on-site. We did exactly this for a homeowner off Victory Boulevard near the 134/5 interchange who ran a business out of a detached rear workshop. The original mortise lock on the front door had been binding all summer, so we re-pinned it and the workshop deadbolts to the same pin and tumbler configuration, then installed a bump-resistant ANSI Grade 1 cylinder on the gate. The owner went from carrying four keys to one. A job like that runs $280-$650 depending on cylinder count and access control integration. Call (818) 390-9007 and Shane Delaney can walk you through what your specific doors would need.
Your door frame is moving with the San Fernando Valley climate. Summer heat above 100°F expands the wood, making the latch bind against the strike plate. Then Santa Ana winds dry everything out and the frame contracts, leaving the latch loose. This is worse on 1950s ranch homes between the 134 and 5 because the original framing has settled for 60-plus years. The fix is realigning the strike plate and often re-shimming the hinges, which in Burbank runs $210-$390 for a full door re-hang. Call (818) 390-9007 for a written quote before winter makes it worse.
For Warner Bros. and Disney lots, yes. Each studio’s security office runs a formal background check and credentialing process before any vendor steps onto the property. This is not optional, and it’s unique to Burbank. Glendale and North Hollywood don’t have this gatekeeping tier. Our technicians hold the required credentials to access studio lots and service multi-building master key systems and integrated access control. If you manage a production facility in Burbank’s Media District, confirm your locksmith has the badge before you schedule. Then call (818) 390-9007 and we’ll get it on the calendar.
In most cases, yes. We use non-destructive entry techniques on standard commercial hardware, including bypass tools for mortise locks and latch manipulation on panic bars that haven’t been damaged. Drilling is a last resort, and if we have to drill, we replace the cylinder the same day. A non-destructive lockout in Burbank runs $95-$160. Call (818) 390-9007 and tell us the door type and brand; we’ll tell you over the phone whether it’s a standard open or something more involved.
Rekey when the hardware body is still in good shape and you just need to rotate access, like after an employee leaves. Replace when the cylinder is worn, the keyway is sloppy, or you want to move from standard commercial locks to a restricted keyway with Medeco or Mul-T-Lock key control. A re-key in Burbank runs $25-$40 per cylinder plus the service fee. A new high security cylinder runs $180-$480 per door. We’ll tell you the honest answer after looking at the hardware, not before. Call (818) 390-9007 for a free assessment.
Written by Shane Delaney, Owner at Blackthorn Locksmith & Security, serving Burbank since 2008.